SwitzerlandDIGMESABabban wakilin kasar Sin a SwitzerlandDIGMESAKamfanin kasar Sin gabatar da kawai abokin tarayya a babban yankin kasar Sin!

DIGMESAShahararren cika inji masana'antuKHSabokan hulɗa,DIGMESArabon kayayyakin a Turai da Amurka kasuwa har zuwa90sama. Jagoran masana'antu na Micro Flow Meter, SwitzerlandDIGMESA(Digmansa) Micro Flow Meter kayayyakin da aka sani da su m aiki da kuma m tsari.DIGMESAAna jin daɗin suna a Turai, ana amfani da shi sosai a fannin abinci, sinadarai, fasahar halitta, magani, semiconductor.

FM15 935-3901/PNP DIGMESAFlow mita neFM15 Grivory 3900The haɓaka kayayyakin, yadu ake amfani da su a cikin kwalba na abin sha, ne duniya sanannen kwalba kayan aiki manufacturerKHSmasu samarwa,FMkewayon zirga-zirga2.83-67.5L/minDaidaito ±1%maimaitawa ±0.25%,matsin lamba a20℃ lokacin20bar,zafin jiki-10-+100℃, siginar fitarwa hanyaNPNkoPNPMax juyawa gudun1900rpm,Yi amfani da Gemstone yumbu bearings, sanye da kwarara curves da matsin lamba asarar curves. Kufa size15mm.

FM15 935-3901/PNP DIGMESAA lokacin tsaftacewa, an fara tabbatar da cewa babu matsin lamba na baya. Ruwa ba pulse kwarara.FMLokacin shigarwa ya kamata a kiyaye kwance shigarwa, kula da shigo da fitarwa shugabanci. Shigo da fitarwa bututun ya kamata kauce wa shaking lokacin cika,

FM15 935-3901/PNP DIGMESAFlow mita za a iya amfani da2.5%dagaNaOHWanke zai yiwu. Amma sa hankali bayan wanke ba za a iya bushe da matsa gas a bututun ba tare da ruwa, in ba haka ba, kwararar ma'auni impeller babban saurin juyawa zai lalace!

FM15 935-3901/PNP DIGMESAKulawar amfani da Flow Meter

•Ensure that there is no fast-pulsatory movement of the media

Tabbatar da kafofin watsa labarai ba tare da sauri pulse kwarara

•Ensure that there are no reverse pressure surges

Tabbatar da babu wani reverse matsin lamba fluctuations

•Ensure that there is no air in the system

Tabbatar da babu iska a cikin tsarin

•Keep the pressure loss as small as possible

Tabbatar da matsin lamba asara kamar yadda ya kamata

•Note the mounting position of the flowmeter

Lura ko shigarwa na injin na zirga-zirga ya dace

•Min/max flow should be in the linear range of the selected flowmeter

Minimum da max kwarara ya kamata a cikin layi kewayon da aka zaɓa kwarara mita

•Clean the system at appropriate intervals

Tsabtace tsarin a daidai lokaci

•Avoid electrical current peaks

Guje wa halin yanzu peak

•Incorrect cabling of power supply +, signal and ground will destroy the flowmeter

Ba daidai wiring, samar da wutar lantarki+, siginar, tare da ƙasa, zai lalata tafiya mita

•Do not mechanically load electrical contacts

Kada ka sanya kaya na inji a kan lantarki connector

•Avoid moisture on the electrical contacts

Guje wa samun danshi a lantarki connection maki

•Avoid stray pick-up via the cable (Do not lay cables in parallel with high current loads)

Kauce wa amo picking (Kada ka sanya wayar cable tare da karfi yanzu kaya)

Guangzhou Minghong sarrafa kansa kayan aiki Co., Ltd SwitzerlandDIGMESABabban wakili,DIGMESAAbokan hulɗar dabarun.DIGMESAKasuwancin a kasar Sin ya raba kashi uku, Taiwan da Hong Kong suna da alhakin kamfani daya, muna da alhakin tallace-tallace na babban yankin. Muna ziyartar musayar fasaha kowace shekara.